How to handle Japan's power outlets and electrical adapters
Japan uses Type A two-prong, non-polarized outlets, meaning your plugs must have two flat pins of the same width. Most modern phone chargers work, but if you have a grounded plug with three prongs, you will need a three-to-two pin adapter.
- Check your plug type. Look at your device plug. If it has two flat, parallel pins, it will fit into most Japanese wall outlets. If your plug has a third round grounding pin, it will not fit without an adapter.
- Verify your voltage requirements. Japan operates at 100V. Most electronics (phones, laptops, cameras) are 'dual voltage' (100V-240V) and will work fine. High-wattage devices like hair dryers or straighteners that are not dual-voltage will either not heat up or could potentially blow a fuse if you use a simple converter.
- Purchase a non-polarized adapter. If your plug has one pin wider than the other (polarized), it will not fit a Japanese wall socket. Buy a cheap '3-pin to 2-pin' or 'polarized to non-polarized' travel adapter before you leave.
- Use a power strip for multiple devices. Japanese hotel rooms often have limited outlets. Bring a small, lightweight power strip from home so you can charge multiple devices using a single wall socket.
- Will my American hair dryer work in Japan?
- Only if it is dual-voltage. Most North American hair dryers are 120V and will run very weakly or not at all in Japan. It is better to use the dryer provided by your hotel.
- Do I need a voltage converter?
- For modern electronics like phones and laptops, no. These are designed to handle 100V-240V. Only use a voltage converter for older, high-wattage appliances, but note that they are heavy and often ineffective.
- Are Japanese outlets grounded?
- Most wall outlets in Japan are 2-prong and not grounded. Some newer construction or bathrooms may have 3-prong outlets, but do not count on it.